ipv6 — Linux IPv6 protocol implementation


#include <sys/socket.h>
#include <netinet/in.h>
tcp6_socket = socket( AF_INET6,
raw6_socket = socket( AF_INET6,
udp6_socket = socket( AF_INET6,


Linux 2.2 optionally implements the Internet Protocol, version 6. This man page contains a description of the IPv6 basic API as implemented by the Linux kernel and glibc 2.1. The interface is based on the BSD sockets interface; see socket(7).

The IPv6 API aims to be mostly compatible with the IPv4 API (see ip(7)). Only differences are described in this man page.

To bind an AF_INET6 socket to any process, the local address should be copied from the in6addr_any variable which has in6_addr type. In static initializations, IN6ADDR_ANY_INIT may also be used, which expands to a constant expression. Both of them are in network byte order.

The IPv6 loopback address (::1) is available in the global in6addr_loopback variable. For initializations, IN6ADDR_LOOPBACK_INIT should be used.

IPv4 connections can be handled with the v6 API by using the v4-mapped-on-v6 address type; thus a program needs to support only this API type to support both protocols. This is handled transparently by the address handling functions in the C library.

IPv4 and IPv6 share the local port space. When you get an IPv4 connection or packet to an IPv6 socket, its source address will be mapped to v6 and it will be mapped to v6.

Address format

struct sockaddr_in6 {
  sa_family_t   sin6_family;
/* AF_INET6 */
  in_port_t   sin6_port;
/* port number */
  uint32_t   sin6_flowinfo;
/* IPv6 flow information */
  struct in6_addr   sin6_addr;
/* IPv6 address */
  uint32_t   sin6_scope_id;
/* Scope ID (new in 2.4) */
struct in6_addr {
  unsigned char   s6_addr[16];
/* IPv6 address */

sin6_family is always set to AF_INET6; sin6_port is the protocol port (see sin_port in ip(7)); sin6_flowinfo is the IPv6 flow identifier; sin6_addr is the 128-bit IPv6 address. sin6_scope_id is an ID depending on the scope of the address. It is new in Linux 2.4. Linux supports it only for link-local addresses, in that case sin6_scope_id contains the interface index (see netdevice(7))

IPv6 supports several address types: unicast to address a single host, multicast to address a group of hosts, anycast to address the nearest member of a group of hosts (not implemented in Linux), IPv4-on-IPv6 to address an IPv4 host, and other reserved address types.

The address notation for IPv6 is a group of 8 4-digit hexadecimal numbers, separated with a ':'. "::" stands for a string of 0 bits. Special addresses are ::1 for loopback and ::FFFF:<IPv4 address> for IPv4-mapped-on-IPv6.

The port space of IPv6 is shared with IPv4.

Socket options

IPv6 supports some protocol-specific socket options that can be set with setsockopt(2) and read with getsockopt(2). The socket option level for IPv6 is IPPROTO_IPV6. A boolean integer flag is zero when it is false, otherwise true.


Turn an AF_INET6 socket into a socket of a different address family. Only AF_INET is currently supported for that. It is allowed only for IPv6 sockets that are connected and bound to a v4-mapped-on-v6 address. The argument is a pointer to an integer containing AF_INET. This is useful to pass v4-mapped sockets as file descriptors to programs that don't know how to deal with the IPv6 API.


Control membership in multicast groups. Argument is a pointer to a struct ipv6_mreq.


getsockopt(): Retrieve the current known path MTU of the current socket. Valid only when the socket has been connected. Returns an integer.

setsockopt(): Set the MTU to be used for the socket. The MTU is limited by the device MTU or the path MTU when path MTU discovery is enabled. Argument is a pointer to integer.


Control path-MTU discovery on the socket. See IP_MTU_DISCOVER in ip(7) for details.


Set the multicast hop limit for the socket. Argument is a pointer to an integer. −1 in the value means use the route default, otherwise it should be between 0 and 255.


Set the device for outgoing multicast packets on the socket. This is allowed only for SOCK_DGRAM and SOCK_RAW socket. The argument is a pointer to an interface index (see netdevice(7)) in an integer.


Control whether the socket sees multicast packets that it has send itself. Argument is a pointer to boolean.

IPV6_RECVPKTINFO (since Linux 2.6.14)

Set delivery of the IPV6_PKTINFO control message on incoming datagrams. Such control messages contain a struct in6_pktinfo, as per RFC 3542. Allowed only for SOCK_DGRAM or SOCK_RAW sockets. Argument is a pointer to a boolean value in an integer.


Set delivery of control messages for incoming datagrams containing extension headers from the received packet. IPV6_RTHDR delivers the routing header, IPV6_AUTHHDR delivers the authentication header, IPV6_DSTOPTS delivers the destination options, IPV6_HOPOPTS delivers the hop options, IPV6_FLOWINFO delivers an integer containing the flow ID, IPV6_HOPLIMIT delivers an integer containing the hop count of the packet. The control messages have the same type as the socket option. All these header options can also be set for outgoing packets by putting the appropriate control message into the control buffer of sendmsg(2). Allowed only for SOCK_DGRAM or SOCK_RAW sockets. Argument is a pointer to a boolean value.


Control receiving of asynchronous error options. See IP_RECVERR in ip(7) for details. Argument is a pointer to boolean.


Pass forwarded packets containing a router alert hop-by-hop option to this socket. Allowed only for SOCK_RAW sockets. The tapped packets are not forwarded by the kernel, it is the user's responsibility to send them out again. Argument is a pointer to an integer. A positive integer indicates a router alert option value to intercept. Packets carrying a router alert option with a value field containing this integer will be delivered to the socket. A negative integer disables delivery of packets with router alert options to this socket.


Set the unicast hop limit for the socket. Argument is a pointer to an integer. −1 in the value means use the route default, otherwise it should be between 0 and 255.

IPV6_V6ONLY (since Linux 2.4.21 and 2.6)

If this flag is set to true (nonzero), then the socket is restricted to sending and receiving IPv6 packets only. In this case, an IPv4 and an IPv6 application can bind to a single port at the same time.

If this flag is set to false (zero), then the socket can be used to send and receive packets to and from an IPv6 address or an IPv4-mapped IPv6 address.

The argument is a pointer to a boolean value in an integer.

The default value for this flag is defined by the contents of the file /proc/sys/net/ipv6/bindv6only. The default value for that file is 0 (false).



The user tried to bind(2) to a link-local IPv6 address, but the sin6_scope_id in the supplied sockaddr_in6 structure is not a valid interface index.


Linux 2.4 will break binary compatibility for the sockaddr_in6 for 64-bit hosts by changing the alignment of in6_addr and adding an additional sin6_scope_id field. The kernel interfaces stay compatible, but a program including sockaddr_in6 or in6_addr into other structures may not be. This is not a problem for 32-bit hosts like i386.

The sin6_flowinfo field is new in Linux 2.4. It is transparently passed/read by the kernel when the passed address length contains it. Some programs that pass a longer address buffer and then check the outgoing address length may break.


The sockaddr_in6 structure is bigger than the generic sockaddr. Programs that assume that all address types can be stored safely in a struct sockaddr need to be changed to use struct sockaddr_storage for that instead.

SOL_IP, SOL_IPV6, SOL_ICMPV6, and other SOL_* socket options are nonportable variants of IPPROTO_*. See also ip(7).


The IPv6 extended API as in RFC 2292 is currently only partly implemented; although the 2.2 kernel has near complete support for receiving options, the macros for generating IPv6 options are missing in glibc 2.1.

IPSec support for EH and AH headers is missing.

Flow label management is not complete and not documented here.

This man page is not complete.


cmsg(3), ip(7)

RFC 2553: IPv6 BASIC API; Linux tries to be compliant to this. RFC 2460: IPv6 specification.


This page is part of release 5.11 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at−pages/.

  This man page is Copyright (C) 2000 Andi Kleen <>.

Permission is granted to distribute possibly modified copies
of this page provided the header is included verbatim,
and in case of nontrivial modification author and date
of the modification is added to the header.

$Id: ipv6.7,v 1.3 2000/12/20 18:10:31 ak Exp $

The following socket options are undocumented
All of the following are from:
    commit 333fad5364d6b457c8d837f7d05802d2aaf8a961
    Author: YOSHIFUJI Hideaki <>
    Support several new sockopt / ancillary data in Advanced API (RFC3542).
IPV6_2292PKTINFO (2.6.14)
    Formerly IPV6_PKTINFO
IPV6_2292HOPOPTS (2.6.14)
    Formerly IPV6_HOPOPTS, which is documented
IPV6_2292DSTOPTS (2.6.14)
    Formerly IPV6_DSTOPTS, which is documented
IPV6_2292RTHDR (2.6.14)
    Formerly IPV6_RTHDR, which is documented
IPV6_2292PKTOPTIONS (2.6.14)
    Formerly IPV6_PKTOPTIONS
IPV6_2292HOPLIMIT (2.6.14)
    Formerly IPV6_HOPLIMIT, which is documented


IPV6_RECVPATHMTU (2.6.35, flag value added in 2.6.14)
    commit 793b14731686595a741d9f47726ad8b9a235385a
    Author: Brian Haley <>
IPV6_PATHMTU (2.6.35, flag value added in 2.6.14)
    commit 793b14731686595a741d9f47726ad8b9a235385a
    Author: Brian Haley <>
IPV6_DONTFRAG (2.6.35, flag value added in 2.6.14)
    commit 793b14731686595a741d9f47726ad8b9a235385a
    Author: Brian Haley <>
    commit 4b340ae20d0e2366792abe70f46629e576adaf5e
    Author: Brian Haley <>

    commit 41a1f8ea4fbfcdc4232f023732584aae2220de31
    Author: YOSHIFUJI Hideaki <>
Based on patch from David L Stevens <>

IPV6_JOIN_ANYCAST (2.4.21 / 2.6)
IPV6_LEAVE_ANYCAST (2.4.21 / 2.6)
IPV6_FLOWLABEL_MGR (2.2.7 / 2.4)
IPV6_FLOWINFO_SEND (2.2.7 / 2.4)

    commit 7cbca67c073263c179f605bdbbdc565ab29d801d
    Author: YOSHIFUJI Hideaki <>
    commit e802af9cabb011f09b9c19a82faef3dd315f27eb
    Author: Stephen Hemminger <>
    Actually a CMSG rather than a sockopt?
    In header file, we have IPV6_RECVORIGDSTADDR == IPV6_ORIGDSTADDR
    commit 6c46862280c5f55eda7750391bc65cd7e08c7535
    Author: Balazs Scheidler <>
    commit 6c46862280c5f55eda7750391bc65cd7e08c7535
    Author: Balazs Scheidler <>
        Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets
were contributed by Harry Mason.
    commit 6c46862280c5f55eda7750391bc65cd7e08c7535
    Author: Balazs Scheidler <>
    commit c4062dfc425e94290ac427a98d6b4721dd2bc91f
    Author: Erich E. Hoover <>