Name

getdents, getdents64 — get directory entries

Synopsis

#include <sys/syscall.h>       /* Definition of  SYS_*  constants */
#include <unistd.h>
long syscall( SYS_getdents,
  unsigned int fd,
  struct linux_dirent *dirp,
  unsigned int count);
 

#define _GNU_SOURCE            /* See feature_test_macros(7) */
#include <dirent.h>
ssize_t getdents64( int fd,
  void *dirp,
  size_t count);
 
[Note] Note
glibc provides no wrapper for
[Note] Note
There is no definition of
.BR getdents (),
necessitating the use of

in glibc; see NOTES.
  

DESCRIPTION

These are not the interfaces you are interested in. Look at readdir(3) for the POSIX-conforming C library interface. This page documents the bare kernel system call interfaces.

getdents()

The system call getdents() reads several linux_dirent structures from the directory referred to by the open file descriptor fd into the buffer pointed to by dirp. The argument count specifies the size of that buffer.

The linux_dirent structure is declared as follows:

struct linux_dirent {
  unsigned long   d_ino;
/* Inode number */
  unsigned long   d_off;
/* Offset to next linux_dirent */
  unsigned short   d_reclen;
/* Length of this linux_dirent */
  char   d_name[];
/* Filename (null\-terminated) */
/* length is actually (d_reclen \- 2 \-
offsetof(struct linux_dirent, d_name)) */
/*
char           pad;       // Zero padding byte
char           d_type;    // File type (only since Linux
// 2.6.4); offset is (d_reclen \- 1)
*/
};

d_ino is an inode number. d_off is the distance from the start of the directory to the start of the next linux_dirent. d_reclen is the size of this entire linux_dirent. d_name is a null-terminated filename.

d_type is a byte at the end of the structure that indicates the file type. It contains one of the following values (defined in <dirent.h>

DT_BLK

This is a block device.

DT_CHR

This is a character device.

DT_DIR

This is a directory.

DT_FIFO

This is a named pipe (FIFO).

DT_LNK

This is a symbolic link.

DT_REG

This is a regular file.

DT_SOCK

This is a UNIX domain socket.

DT_UNKNOWN

The file type is unknown.

The d_type field is implemented since Linux 2.6.4. It occupies a space that was previously a zero-filled padding byte in the linux_dirent structure. Thus, on kernels up to and including 2.6.3, attempting to access this field always provides the value 0 (DT_UNKNOWN).

Currently, only some filesystems (among them: Btrfs, ext2, ext3, and ext4) have full support for returning the file type in d_type. All applications must properly handle a return of DT_UNKNOWN.

getdents64()

The original Linux getdents() system call did not handle large filesystems and large file offsets. Consequently, Linux 2.4 added getdents64(), with wider types for the d_ino and d_off fields. In addition, getdents64() supports an explicit d_type field.

The getdents64() system call is like getdents(), except that its second argument is a pointer to a buffer containing structures of the following type:

struct linux_dirent64 {
  ino64_t   d_ino;
/* 64\-bit inode number */
  off64_t   d_off;
/* 64\-bit offset to next structure */
  unsigned short   d_reclen;
/* Size of this dirent */
  unsigned char   d_type;
/* File type */
  char   d_name[];
/* Filename (null\-terminated) */
};

RETURN VALUE

On success, the number of bytes read is returned. On end of directory, 0 is returned. On error, −1 is returned, and errno is set to indicate the error.

ERRORS

EBADF

Invalid file descriptor fd.

EFAULT

Argument points outside the calling process's address space.

EINVAL

Result buffer is too small.

ENOENT

No such directory.

ENOTDIR

File descriptor does not refer to a directory.

CONFORMING TO

SVr4.

NOTES

Library support for getdents64() was added in glibc 2.30; Glibc does not provide a wrapper for getdents(); call getdents() (or getdents64() on earlier glibc versions) using syscall(2). In that case you will need to define the linux_dirent or linux_dirent64 structure yourself.

Probably, you want to use readdir(3) instead of these system calls.

These calls supersede readdir(2).

EXAMPLES

The program below demonstrates the use of getdents(). The following output shows an example of what we see when running this program on an ext2 directory:

$ ./a.out /testfs/
-−−−−−−−−−−−−−− nread=120 −−−−−−−−−−−−−−−
inode#    file type  d_reclen  d_off   d_name
       2  directory    16         12  .
       2  directory    16         24  ..
      11  directory    24         44  lost+found
      12  regular      16         56  a
  228929  directory    16         68  sub
   16353  directory    16         80  sub2
  130817  directory    16       4096  sub3

Program source

#define _GNU_SOURCE
#include <dirent.h>     /* Defines DT_* constants */
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/stat.h>
#include <sys/syscall.h>

#define handle_error(msg) \
        do { perror(msg); exit(EXIT_FAILURE); } while (0)

struct linux_dirent {
    unsigned long  d_ino;
    off_t          d_off;
    unsigned short d_reclen;
    char           d_name[];
};

#define BUF_SIZE 1024

int
main(int argc, char *argv[])
{
    int fd;
    long nread;
    char buf[BUF_SIZE];
    struct linux_dirent *d;
    char d_type;

    fd = open(argc > 1 ? argv[1] : ".", O_RDONLY | O_DIRECTORY);
    if (fd == −1)
        handle_error("open");

    for (;;) {
        nread = syscall(SYS_getdents, fd, buf, BUF_SIZE);
        if (nread == −1)
            handle_error("getdents");

        if (nread == 0)
            break;

        printf("−−−−−−−−−−−−−−− nread=%d −−−−−−−−−−−−−−−\n", nread);
        printf("inode#    file type  d_reclen  d_off   d_name\n");
        for (long bpos = 0; bpos < nread;) {
            d = (struct linux_dirent *) (buf + bpos);
            printf("%8ld  ", d−>d_ino);
            d_type = *(buf + bpos + d−>d_reclen − 1);
            printf("%−10s ", (d_type == DT_REG) ?  "regular" :
                             (d_type == DT_DIR) ?  "directory" :
                             (d_type == DT_FIFO) ? "FIFO" :
                             (d_type == DT_SOCK) ? "socket" :
                             (d_type == DT_LNK) ?  "symlink" :
                             (d_type == DT_BLK) ?  "block dev" :
                             (d_type == DT_CHR) ?  "char dev" : "???");
            printf("%4d %10jd  %s\n", d−>d_reclen,
                    (intmax_t) d−>d_off, d−>d_name);
            bpos += d−>d_reclen;
        }
    }

    exit(EXIT_SUCCESS);
}

SEE ALSO

readdir(2), readdir(3), inode(7)

COLOPHON

This page is part of release 5.13 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright (C) 1995 Andries Brouwer (aebcwi.nl)
and Copyright 2008, 2015 Michael Kerrisk <mtk.manpagesgmail.com>

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END

Written 11 June 1995 by Andries Brouwer <aebcwi.nl>
Modified 22 July 1995 by Michael Chastain <mecduracef.shout.net>:
  Derived from 'readdir.2'.
Modified Tue Oct 22 08:11:14 EDT 1996 by Eric S. Raymond <esrthyrsus.com>