pipe, pipe2 — create pipe


#include <unistd.h>
int pipe( int pipefd[2]);

#define _GNU_SOURCE              /* See feature_test_macros(7) */
#include <fcntl.h>               /* Obtain O_* constant definitions */
#include <unistd.h>
int pipe2( int pipefd[2],
  int flags);


pipe() creates a pipe, a unidirectional data channel that can be used for interprocess communication. The array pipefd is used to return two file descriptors referring to the ends of the pipe. pipefd[0] refers to the read end of the pipe. pipefd[1] refers to the write end of the pipe. Data written to the write end of the pipe is buffered by the kernel until it is read from the read end of the pipe. For further details, see pipe(7).

If flags is 0, then pipe2() is the same as pipe(). The following values can be bitwise ORed in flags to obtain different behavior:


Set the close-on-exec (FD_CLOEXEC) flag on the two new file descriptors. See the description of the same flag in open(2) for reasons why this may be useful.

O_DIRECT (since Linux 3.4)

Create a pipe that performs I/O in "packet" mode. Each write(2) to the pipe is dealt with as a separate packet, and read(2)s from the pipe will read one packet at a time. Note the following points:

  • Writes of greater than PIPE_BUF bytes (see pipe(7)) will be split into multiple packets. The constant PIPE_BUF is defined in <limits.h>

  • If a read(2) specifies a buffer size that is smaller than the next packet, then the requested number of bytes are read, and the excess bytes in the packet are discarded. Specifying a buffer size of PIPE_BUF will be sufficient to read the largest possible packets (see the previous point).

  • Zero-length packets are not supported. (A read(2) that specifies a buffer size of zero is a no-op, and returns 0.)

Older kernels that do not support this flag will indicate this via an EINVAL error.


Set the O_NONBLOCK file status flag on the two new open file descriptions. Using this flag saves extra calls to fcntl(2) to achieve the same result.


On success, zero is returned. On error, −1 is returned, and errno is set appropriately.



pipefd is not valid.


(pipe2()) Invalid value in flags.


Too many file descriptors are in use by the process.


The system limit on the total number of open files has been reached.


pipe2() was added to Linux in version 2.6.27; glibc support is available starting with version 2.9.


pipe(): POSIX.1-2001.

pipe2() is Linux-specific.


The following program creates a pipe, and then fork(2)s to create a child process; the child inherits a duplicate set of file descriptors that refer to the same pipe. After the fork(2), each process closes the descriptors that it doesn't need for the pipe (see pipe(7)). The parent then writes the string contained in the program's command-line argument to the pipe, and the child reads this string a byte at a time from the pipe and echoes it on standard output.

Program source

#include <sys/types.h>
#include <sys/wait.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

main(int argc, char *argv[])
    int pipefd[2];
    pid_t cpid;
    char buf;

    if (argc != 2) {
        fprintf(stderr, "Usage: %s <string>\n", argv[0]);

    if (pipe(pipefd) == −1) {

    cpid = fork();
    if (cpid == −1) {

    if (cpid == 0) {    /* Child reads from pipe */
        close(pipefd[1]);          /* Close unused write end */

        while (read(pipefd[0], &buf, 1) > 0)
            write(STDOUT_FILENO, &buf, 1);

        write(STDOUT_FILENO, "\n", 1);

    } else {            /* Parent writes argv[1] to pipe */
        close(pipefd[0]);          /* Close unused read end */
        write(pipefd[1], argv[1], strlen(argv[1]));
        close(pipefd[1]);          /* Reader will see EOF */
        wait(NULL);                /* Wait for child */


fork(2), read(2), socketpair(2), write(2), popen(3), pipe(7)


This page is part of release 3.72 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at−pages/.

  Copyright (C) 2005, 2008, Michael Kerrisk <>
(A few fragments remain from an earlier (1992) version by
Drew Eckhardt <>.)

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.

Modified by Michael Haardt <>
Modified 1993-07-23 by Rik Faith <>
Modified 1996-10-22 by Eric S. Raymond <>
Modified 2004-06-17 by Michael Kerrisk <>
Modified 2005, mtk: added an example program
Modified 2008-01-09, mtk: rewrote DESCRIPTION; minor additions
    to EXAMPLE text.
2008-10-10, mtk: add description of pipe2()